Skip to product information
1 of 3

TERN

TERN - Cargo Hold 28 Pannier

TERN - Cargo Hold 28 Pannier

Regular price $138.00 CAD
Regular price Sale price $138.00 CAD
Sale Sold out
Shipping calculated at checkout.

Low stock: 1 left

  • Description
  • Description
  • Tern Pannier 28 L Fidlock Magnetic Rolltop + Bucket Mode Bluesign Sold Individually

    Cargo Hold 28 · Pannier · 28 L · 1000D Nylon · Waterproof Liner · Fidlock · Rolltop · NBD / HSD / Quick Haul / Short Haul

    Tern Cargo Hold 28 Pannier

    A 28-litre rolltop pannier in 1000D nylon with a waterproof liner — Fidlock magnetic buckle for one-handed closure, a Bucket Mode for easy loading of bulky items, reflective detailing, and Bluesign certified fabric. Sold individually.

    $138 CAD · each

    Sold individually — price is per pannier. The Cargo Hold 28 is priced and sold as a single pannier, not a pair. Most riders use two; budget $276 for a matched set. Load limit is 4 kg (9 lb) per pannier. Verify rack compatibility with your specific bike using Tern's compatibility checker — designed for the NBD, HSD, Quick Haul, and Short Haul. 28 L volume per pannier 4 kg load limit per pannier 490 g bag weight each

    The Tern Cargo Hold 28 Pannier is a 28-litre rolltop bag in 1000-denier nylon with a waterproof internal liner, designed for the rear racks of the NBD, HSD, Quick Haul, and Short Haul. The rolltop closure gives variable volume — roll down further for a smaller, lighter load; roll less for a fully stuffed 28 litres. Opening the top wide converts the bag to Bucket Mode: a wide open container that makes loading bulky or irregular items easier than threading them through a smaller opening. A Fidlock magnetic buckle locks the rolled top shut with one hand — no fumbling with clips while wearing gloves or managing other cargo. Bluesign certified 1000D nylon means the fabric meets sustainability standards for dye and manufacturing processes. Reflective decals on the exterior improve rear visibility at night.


    Rolltop + Bucket Mode — two opening configurations

    The rolltop closure seals the bag for weather protection and security — roll the top down multiple times and clip the Fidlock to close. Opening the top and folding it back converts the pannier to Bucket Mode: a wide-open rectangular container with no top restriction. Bucket Mode makes it straightforward to drop in a grocery bag, a change of shoes, or anything that's hard to feed through the tighter rolltop opening. The two modes address the trade-off between access convenience and weather sealing.


    Fidlock magnetic buckle — one-handed closure

    Fidlock makes magnetic-assisted buckle systems used in cycling, outdoor, and marine gear. The magnetic element guides the two buckle halves together when brought close — they snap shut without needing to visually align a male/female connector. One-handed closure is the practical result: useful when the other hand is holding cargo, a lock, or a phone. The buckle releases with a pull in the correct direction and resists accidental opening under load.


    1000D nylon + waterproof liner — durable and dry

    1000 denier (1000D) nylon is the standard for high-durability panniers — the same weight used in motorcycle luggage and heavy-duty cycling bags. The thick weave resists abrasion from rack contact, road debris, and general handling. The waterproof internal liner is a separate sealed layer inside the bag body — rain that penetrates the outer fabric is stopped at the liner, keeping contents dry without relying on the outer nylon to be fully waterproof under sustained rain.


    Bluesign certified fabric — sustainable production

    Bluesign is an independent certification for textile manufacturing that covers chemical use, water consumption, energy use, and worker safety in the dyeing and finishing process. Bluesign certified fabric means the nylon was produced to verified environmental and safety standards — relevant for buyers who consider the supply chain alongside the product itself. The certification applies to the fabric, not the bag as a whole.


    Child seat compatible — stays closed alongside passenger

    On HSD, Quick Haul, and Short Haul bikes equipped with a child seat, the Cargo Hold 28 can remain mounted and closed while the child seat is in use. The pannier positioning on these bikes is designed to allow both simultaneously — the bag doesn't need to be removed when switching to passenger mode. Confirm this with Tern's compatibility checker for your specific bike and child seat combination.


    Reflective decals — rear visibility at night

    Reflective elements on the pannier exterior return light from vehicle headlights when riding at night. A loaded pannier on the rear of the bike is directly in the sightline of following traffic — reflective detailing on the bag itself contributes to overall rear visibility independent of the bike's dedicated rear light. The reflective areas are positioned on the most visible faces of the pannier when mounted.

    Brand Tern
    Model Cargo Hold 28 Pannier
    Type Rolltop pannier
    Volume 28 L per pannier
    Load limit 4 kg (9 lb) per pannier
    Bag weight ~490g (1.08 lb) per pannier
    Material Nylon 1000D — Bluesign certified
    Waterproofing Waterproof internal liner + weather-resistant exterior
    Closure Rolltop + Fidlock magnetic buckle (one-handed)
    Bucket Mode Yes — wide-open loading configuration
    Reflective Yes — exterior reflective decals
    Dimensions 330 × 200 × 310 mm (13 × 7.9 × 12.2 in)
    Sold as Individually — one pannier per purchase
    Child seat use Compatible alongside child seats — HSD · Quick Haul · Short Haul
    Compatible bikes NBD · HSD · Quick Haul · Short Haul — verify with Tern compatibility checker
    $138 CAD · each

    Tern Cargo Hold 28 Pannier · 28 L · 1000D Nylon · Fidlock · Rolltop + Bucket Mode · Bluesign · Sold Individually

    Tern © 2026 Cargo Hold 28 Pannier
    View full details

    Note:

    Bikes that are prebuilt in store do not have their stock reflected online. We do our best to ensure that the information on this site is up to date and accurate. However, component changes, and stock changes do occur for various reasons at a fast pace and there may be brief delays on site updates. If there is a product you have questions about contact us at info@powerinmotion.ca or call 403-233-8841 to speak with a representative.