Tern
TERN Loader™ Rack Gen2
TERN Loader™ Rack Gen2
Out of stock
Couldn't load pickup availability
Loader Rack Gen 2 · Rear · Triangular Reinforcement · 25 kg · KLICKfix Rackpack + Topklip · Alloy 6061
Tern Loader Rack Gen 2
A lightweight rear rack for Tern folding bikes — triangular structural reinforcement, 25 kg capacity, KLICKfix Rackpack and Topklip compatibility, double-hook SideStrap for panniers, and integrated rear light mount with internal cable routing.
The Tern Loader Rack Gen 2 is a rear rack designed for commuting and everyday cargo use on Tern folding bikes. A triangular structural frame provides rigidity without adding unnecessary weight — at 0.697 kg it's lighter than many comparable racks while still rated for 25 kg of cargo. The top platform accepts KLICKfix Rackpack baskets and bags, as well as KLICKfix Topklip accessories. Lower side tubes keep panniers in position and are reinforced to resist the lateral movement that a loaded pannier introduces under cornering. The double-hook SideStrap system adds an additional anchor point to stop panniers rotating around the rail. An integrated mount for a rear light or reflector runs cable internally, keeping the rack body clean.
Highlights
Triangular reinforcement — rigid without added weight
The rack frame uses a triangular structural pattern rather than a simple ladder frame. Triangulation distributes load forces more efficiently, allowing the rack to achieve its 25 kg capacity rating at just 0.697 kg of rack weight. Stiffer under load than an equivalent-weight ladder frame.
KLICKfix Rackpack + Topklip — two bag systems on one rack
The Loader Rack Gen 2 supports both KLICKfix Rackpack accessories (baskets, trunk bags) and KLICKfix Topklip accessories — two formats within the KLICKfix ecosystem. Topklip bags clip to a rail on the top platform; Rackpack bags use a twist-lock interface. Both detach and reattach without tools.
Lower side tubes — panniers stay in place
The lower side tubes are positioned so loaded panniers can't shift out of their hooks under riding forces. On a rack without lower tube support, panniers may bounce up and off the hook on rough road surfaces — the lower tubes act as a secondary retainer, keeping the pannier seated regardless of road quality.
Double-hook SideStrap — anti-roll pannier anchor
The SideStrap uses two hooks rather than one to anchor panniers against rotation around the rail. A single anchor point allows the pannier to pivot under a shifting load — the double-hook system prevents this, keeping the pannier upright and stable even as cargo shifts inside.
Integrated light mount — internal cable routing
A rear light and reflector mount is built into the rack. Cable routing is internal — no wires run exposed along the outside of the rack body. Cleaner appearance and no risk of cables catching on panniers or cargo during loading.
Commute and shopping optimised
The Loader Rack Gen 2's feature set — panniers, KLICKfix baskets, SideStrap, light mount — reflects a commuting and grocery use case rather than bikepacking or adventure touring. Designed for daily loading and unloading cycles, quick-detach accessories, and reliable cargo retention on urban roads.
Specifications
| Brand | Tern |
| Model | Loader Rack Gen 2 |
| Position | Rear rack |
| Load capacity | 25 kg (55 lb) |
| Rack weight | 0.697 kg (1.5 lb) |
| Material | Aluminium 6061 — triangular reinforcement |
| Dimensions | 534 × 160 × 278 mm (21 × 6.3 × 10.9 in) |
| Bag system | KLICKfix Rackpack · KLICKfix Topklip |
| Pannier system | Lower side tubes + double-hook SideStrap anti-roll |
| Recommended bags | Dry Goods Bag Gen 1 · Kontti Basket Gen 1 |
| Light mount | Integrated — internal cable routing |
| Also available | Cargo Rack ($138) — DoubleTruss 3D, 0.94 kg, dual rail |
| Compatibility | Tern folding bikes — verify with Tern compatibility checker |
Tern Loader Rack Gen 2 · Rear · Triangular · 25 kg · KLICKfix Rackpack + Topklip · SideStrap · #6061
- Description
Loader Rack Gen 2 · Rear · Triangular Reinforcement · 25 kg · KLICKfix Rackpack + Topklip · Alloy 6061
Tern Loader Rack Gen 2
A lightweight rear rack for Tern folding bikes — triangular structural reinforcement, 25 kg capacity, KLICKfix Rackpack and Topklip compatibility, double-hook SideStrap for panniers, and integrated rear light mount with internal cable routing.
$90 CADTern folding bikes only — rear rack. The Loader Rack Gen 2 mounts to the rear of compatible Tern folding bikes. Verify your specific model using Tern's compatibility checker before ordering. 25 kg load capacity (55 lb) 0.697 kg rack weight (1.5 lb) KLICKfix Rackpack + Topklip
The Tern Loader Rack Gen 2 is a rear rack designed for commuting and everyday cargo use on Tern folding bikes. A triangular structural frame provides rigidity without adding unnecessary weight — at 0.697 kg it's lighter than many comparable racks while still rated for 25 kg of cargo. The top platform accepts KLICKfix Rackpack baskets and bags, as well as KLICKfix Topklip accessories. Lower side tubes keep panniers in position and are reinforced to resist the lateral movement that a loaded pannier introduces under cornering. The double-hook SideStrap system adds an additional anchor point to stop panniers rotating around the rail. An integrated mount for a rear light or reflector runs cable internally, keeping the rack body clean.
Highlights
Triangular reinforcement — rigid without added weight
The rack frame uses a triangular structural pattern rather than a simple ladder frame. Triangulation distributes load forces more efficiently, allowing the rack to achieve its 25 kg capacity rating at just 0.697 kg of rack weight. Stiffer under load than an equivalent-weight ladder frame.
KLICKfix Rackpack + Topklip — two bag systems on one rack
The Loader Rack Gen 2 supports both KLICKfix Rackpack accessories (baskets, trunk bags) and KLICKfix Topklip accessories — two formats within the KLICKfix ecosystem. Topklip bags clip to a rail on the top platform; Rackpack bags use a twist-lock interface. Both detach and reattach without tools.
Lower side tubes — panniers stay in place
The lower side tubes are positioned so loaded panniers can't shift out of their hooks under riding forces. On a rack without lower tube support, panniers may bounce up and off the hook on rough road surfaces — the lower tubes act as a secondary retainer, keeping the pannier seated regardless of road quality.
Double-hook SideStrap — anti-roll pannier anchor
The SideStrap uses two hooks rather than one to anchor panniers against rotation around the rail. A single anchor point allows the pannier to pivot under a shifting load — the double-hook system prevents this, keeping the pannier upright and stable even as cargo shifts inside.
Integrated light mount — internal cable routing
A rear light and reflector mount is built into the rack. Cable routing is internal — no wires run exposed along the outside of the rack body. Cleaner appearance and no risk of cables catching on panniers or cargo during loading.
Commute and shopping optimised
The Loader Rack Gen 2's feature set — panniers, KLICKfix baskets, SideStrap, light mount — reflects a commuting and grocery use case rather than bikepacking or adventure touring. Designed for daily loading and unloading cycles, quick-detach accessories, and reliable cargo retention on urban roads.
Specifications
| Brand | Tern |
| Model | Loader Rack Gen 2 |
| Position | Rear rack |
| Load capacity | 25 kg (55 lb) |
| Rack weight | 0.697 kg (1.5 lb) |
| Material | Aluminium 6061 — triangular reinforcement |
| Dimensions | 534 × 160 × 278 mm (21 × 6.3 × 10.9 in) |
| Bag system | KLICKfix Rackpack · KLICKfix Topklip |
| Pannier system | Lower side tubes + double-hook SideStrap anti-roll |
| Recommended bags | Dry Goods Bag Gen 1 · Kontti Basket Gen 1 |
| Light mount | Integrated — internal cable routing |
| Also available | Cargo Rack ($138) — DoubleTruss 3D, 0.94 kg, dual rail |
| Compatibility | Tern folding bikes — verify with Tern compatibility checker |
Tern Loader Rack Gen 2 · Rear · Triangular · 25 kg · KLICKfix Rackpack + Topklip · SideStrap · #6061
Tern © 2026 Loader Rack Gen 2Share
Note:
Bikes that are prebuilt in store do not have their stock reflected online. We do our best to ensure that the information on this site is up to date and accurate. However, component changes, and stock changes do occur for various reasons at a fast pace and there may be brief delays on site updates. If there is a product you have questions about contact us at info@powerinmotion.ca or call 403-233-8841 to speak with a representative.